I need a VC for a Zenith console 10-S-567 (chassis 10A1) and can't locate a used replacement. It is a 2.5 meg VC with on-off switch and two taps that go to the tone control push buttons. Does anyone have one or does any one know how to duplicate its functionality with a modern potentiometer?

Hi Tom

Here is a list of resources:

http://antiqueradios.com/resources/Parts_and_Tubes/more2.html

Mark Oppat has volume controls. There are 54 suppliers of old radio parts listed.

http://www.oldradioparts.net/

Norm

:I need a VC for a Zenith console 10-S-567 (chassis 10A1) and can't locate a used replacement. It is a 2.5 meg VC with on-off switch and two taps that go to the tone control push buttons. Does anyone have one or does any one know how to duplicate its functionality with a modern potentiometer?
:

:I need a VC for a Zenith console 10-S-567 (chassis 10A1) and can't locate a used replacement. It is a 2.5 meg VC with on-off switch and two taps that go to the tone control push buttons. Does anyone have one or does any one know how to duplicate its functionality with a modern potentiometer?
:
:
:Mark has a lot of stuff and Norm gave you most of the resources anyone can. If you do run out of options let me know. I have three or four Zenith chassis' and one of them may have the pot you need. I'm not sure what all is listed at Marks site but I go to Alan Jasperson at gn4radios.com for a lot of original Zenith parts. He usually comes through for me. I just talked him into selling me a 12" speaker, acoustic cone and all associated hardware for a 12-S-266 and even at $75 it's worth every penny for this set.

Johnny