hello

please could anybody give me the powertrafo´s
secondary tensions of the Atwater Kent Model 72??
thank you so much.
best regards
gerhard

This may be of some help.

http://www.atwaterkent.info/TechData/akSvc3101Index.html

:This may be of some help.
:
:http://www.atwaterkent.info/TechData/akSvc3101Index.html
:
Thank you :o)

Hi

I would use 350-0-350 AC for high voltage. It's not called out but plate voltage of 250 DC on the output tubes along with -55 bias is shown. There will also be voltage drop in chokes.

Here is AK service data:

http://www.atwaterkent.info/TechData/akSvc3101Index.html

Norm

:hello
:
:please could anybody give me the powertrafo´s
:secondary tensions of the Atwater Kent Model 72??
:thank you so much.
:best regards
:gerhard
:

thank you :o)

:Hi
:
: I would use 350-0-350 AC for high voltage. It's not called out but plate voltage of 250 DC on the output tubes along with -55 bias is shown. There will also be voltage drop in chokes.
:
: Here is AK service data:
:
:http://www.atwaterkent.info/TechData/akSvc3101Index.html
:
:Norm
:
:
:
:
::hello
::
::please could anybody give me the powertrafo´s
::secondary tensions of the Atwater Kent Model 72??
::thank you so much.
::best regards
::gerhard
::
: