hey,
Iam building a tube radio cabinet for a project and i was wondering if anyone could help me with the sizes of a few tubes i need for the final cabinet measurements.
any help would be greatly appreciated
Tubes: 12SA7, 12SK7, 12SQ7, 50L6GT and a 35Z5GT rectifier.
also the radio cabinet im building is a Stewart Warner 13-5u1 if you know the dimensions of this cabinet that would also be a big help. thank you

Hi Mat

A 50L6GT & 35Z5GT will be slightly taller than other tubes. You can find tube info for 50L6GT here:

http://www.tubezone.net/pdf/50l6.pdf

Other tube information can be found by entering numbers here:

http://tdsl.duncanamps.com/tubesearch.php

Norm

:hey,
:Iam building a tube radio cabinet for a project and i was wondering if anyone could help me with the sizes of a few tubes i need for the final cabinet measurements.
:any help would be greatly appreciated
:Tubes: 12SA7, 12SK7, 12SQ7, 50L6GT and a 35Z5GT rectifier.
:also the radio cabinet im building is a Stewart Warner 13-5u1 if you know the dimensions of this cabinet that would also be a big help. thank you
:

Thank You very much for the sites they are a big help for me to find the size ratio for the estimated blueprint for the cabinet that i drew up but it still would be nice to have a site that had specs on the cabinet dimensions. if you know of any sites or the sizes themselves that would be great but if not don't worry
Thank You again Norm
:Hi Mat
:
: A 50L6GT & 35Z5GT will be slightly taller than other tubes. You can find tube info for 50L6GT here:
:
:http://www.tubezone.net/pdf/50l6.pdf
:
: Other tube information can be found by entering numbers here:
:
:http://tdsl.duncanamps.com/tubesearch.php
:
:Norm
:
:
::hey,
::Iam building a tube radio cabinet for a project and i was wondering if anyone could help me with the sizes of a few tubes i need for the final cabinet measurements.
::any help would be greatly appreciated
::Tubes: 12SA7, 12SK7, 12SQ7, 50L6GT and a 35Z5GT rectifier.
::also the radio cabinet im building is a Stewart Warner 13-5u1 if you know the dimensions of this cabinet that would also be a big help. thank you
::
: