Need the alignment for a 1936 Zenith AM radio receiver, model 9S-55, chassis 5903. Also, need to know the value of the trimmers on the variable tuning capacitor. I'm missing the mica insert on one of the trimmers.

Henry,
The alignment procedure is included with the schematic:

http://www.nostalgiaair.org/PagesByModel/466/M0025466.pdf

Carl T

:Need the alignment for a 1936 Zenith AM radio receiver, model 9S-55, chassis 5903. Also, need to know the value of the trimmers on the variable tuning capacitor. I'm missing the mica insert on one of the trimmers.
:

Carl,
Thanks for the heads up. Didn't see that second page!

:Henry,
:The alignment procedure is included with the schematic:
:
:http://www.nostalgiaair.org/PagesByModel/466/M0025466.pdf
:
:Carl T
:
::Need the alignment for a 1936 Zenith AM radio receiver, model 9S-55, chassis 5903. Also, need to know the value of the trimmers on the variable tuning capacitor. I'm missing the mica insert on one of the trimmers.
::
:

Henry,

You may be able to use a piece cut from a mica transistor insulator to replace the missing one.

Radiodoc
***************

:Need the alignment for a 1936 Zenith AM radio receiver, model 9S-55, chassis 5903. Also, need to know the value of the trimmers on the variable tuning capacitor. I'm missing the mica insert on one of the trimmers.
: