Stewart Warner Identification

12/13/1998 8:03:11 PMMike Hamilton

Help. I'm trying to find info about my Stewart Warner. It is a console with the model number A61CR3 on both a paper label inside the carcasse and stamped onto the chassis. It is a beauty with a 78rpm changer in a pullout drawer just above the speaker. She uses 6 tubes 5Y3GT,6SG7,6SF7,6J5GT,6SJ7,SV6GT. Anybody know her age or help me with any info?

Thanx

12/13/1998 9:26:03 PMNorm Leal

: Help. I'm trying to find info about my Stewart Warner. It is a console with the model number A61CR3 on both a paper label inside the carcasse and stamped onto the chassis. It is a beauty with a 78rpm changer in a pullout drawer just above the speaker. She uses 6 tubes 5Y3GT,6SG7,6SF7,6J5GT,6SJ7,SV6GT. Anybody know her age or help me with any info?

: Thanx

Hi Mike

The Stewart Warner A61CR3 was made in 1948. The schematic and alignment data can be found in Rider Volume #17. Some libraries can get you the information.

Norm

8/16/2000 7:41:21 PMJason Collins

I am trying to find information on my Stewart Warner radio. It is model R460. It is covered in tweed like an old Fender. Any help would be appreciated. Jason

1/21/2000 3:50:14 PMJIM STEVENS

: Help. I'm trying to find info about my Stewart Warner
.
looking for installation manual for your (HOT BOX MODEL 8303C)Southwind corportion

: Thanx

11/21/2002 3:53:24 PMstacey hill

:: Help. I'm trying to find info about my Stewart Warner
:.
:looking for installation manual for your (HOT BOX MODEL 8303C)Southwind corportion
:
:: Thanx
:
:

11/21/2002 3:56:43 PMstacey hill

:: Help. I'm trying to find info about my Stewart Warner
:.
:looking for installation manual for your (HOT BOX MODEL 8303C)Southwind corportion
:
:: Thanx STACEY HILL
:interstate detroit diesel 1-800-821-7298 williston nd
:we are the hot box people give me a call we can help.

4/20/2000 8:56:58 AMSteve's Antique Auto Repair, Inc.

Hi,

We need help on an Alemite Wheel Spinner and Balancer. It is Model #7C64A Serial # R5. We just purchased it for our shop that only works on 1970 and earlier vehicles and we need an operator manual for it. Any help would be greatly apprecialted. Thanks

Rick

10/4/2000 3:24:46 AMPinetown wheel alignment specialists

Help!
I have an alemite wheel balancer model 336360? serial no X12 volts 208 - 230 H2 50 - 60 phase 1 amps 17 made by Stewart/Warner.
I need availability and prices on;
on/off switch inside motor no 333447?
pick up cable for the same machine
spinner wheel for motor
Please can someone help with an address or e-mail
Many thank
Wally Petrie

11/25/2001 2:26:43 PMM Benner

http://www.alemite.com/

Alemite Corporation

7845 Little Avenue

Charlotte, NC 28226

4/26/2000 3:50:56 PMCole Ceece

I'm looking for a price of a stewart-warner model#138R, and its age.