If it were Bakelite, acetone would be fine - but since it's a plastic that's affected by acetone, I wouldn't use it. Most people would recommend wet sanding followed by polishing with a suitable plastic polish. Done properly, the results could be nearly undetectable.

How the heck did this get here???

 Home  Resources  References  Tubes  Forums  Links  Support 

Index

Next Message >

Antique Radio Technical Forum

Kuba Carmen Export Chassis 664 Stereo Radiogram Looking for Schematic



Posted by Bob E. on 08/10/2008 09:49

Anyone point me to a source for a schematic for this Console Set? It was made in West Germany. I opened my mouth about fixing old radios and a brother-in-law wants me to try to get it functioning again. I do not know where to look for schematics for European electronics. Any help will be greatly appreciated. Thanks, Bob

Kuba Carmen Export Chassis 664 Stereo Radiogram Looking for Schematic
Bob E.	08/10/2008 09:49
Walt	08/10/2008 11:56
Bob E.	08/10/2008 13:11
mark mcmackin	08/22/2008 08:44
Dennis Wess	08/10/2008 12:34
Dennis Wess	08/10/2008 14:32

	Index	Next Message >

© 1996-2004 Nostalgia Air