Can anyone help identify model of the radio below and/or supply schematic information? Its a four tube set, 6D6, 6C6, 43, and 25Z5. Plate on front bottom of cabinet says "Silver Marshall", there are no labels in cabinet with tube or radio information, and no chassis stampings. This is a "curtain burner" set, BCB only. It came to me with two electolytic capacitors rolling around inside. Obviously, I need a schematic but have been unsuccessful with the tube line up. Any help would be appreciated.

Allan (see picture below)

:Can anyone help identify model of the radio below and/or supply schematic information? Its a four tube set, 6D6, 6C6, 43, and 25Z5. Plate on front bottom of cabinet says "Silver Marshall", there are no labels in cabinet with tube or radio information, and no chassis stampings. This is a "curtain burner" set, BCB only. It came to me with two electolytic capacitors rolling around inside. Obviously, I need a schematic but have been unsuccessful with the tube line up. Any help would be appreciated.
:
:Allan (see picture below)
:
:
:
:
:
:
:
:

::Can anyone help identify model of the radio below and/or supply schematic information? Its a four tube set, 6D6, 6C6, 43, and 25Z5. Plate on front bottom of cabinet says "Silver Marshall", there are no labels in cabinet with tube or radio information, and no chassis stampings. This is a "curtain burner" set, BCB only. It came to me with two electolytic capacitors rolling around inside. Obviously, I need a schematic but have been unsuccessful with the tube line up. Any help would be appreciated.
::
::Allan (see picture below)
::
::
::
::
::
::
::
::

Allen,
After much research I discovered that my Silver Marshall tombstone was made by Traveler Radio. Try matching the tube line up with schematics in the Resources section on this site. Good luck,
Jon.