Atwater Kent tuning knob

6/19/2007 12:48:03 PMGeorge Stevens

Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george

6/19/2007 3:45:56 PMTerry F

:Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george

George,
Try David Frush - www.parts2many@aol.com
Terry

6/19/2007 3:57:10 PMGeorge

Thanks Terry, Can't seem to find his site, typed this site in and just get the aol home page.

::Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george
:
:George,
:Try David Frush - www.parts2many@aol.com
:Terry
:

6/19/2007 4:42:42 PMCarl T

:Thanks Terry, Can't seem to find his site, typed this site in and just get the aol home page.

George,
I don't think David has a web page?
Drop the www. from Terry's link and you will have his e-mail address.
Carl T
:
:::Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george
::
::George,
::Try David Frush - www.parts2many@aol.com
::Terry
::

6/19/2007 4:45:07 PMGeorge

::Thanks Terry, Can't seem to find his site, typed this site in and just get the aol home page.
:
:George,
:I don't think David has a web page?
:Drop the www. from Terry's link and you will have his e-mail address.
:Carl T
::Thanks Carl I did email him.
::::Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george
:::
:::George,
:::Try David Frush - www.parts2many@aol.com
:::Terry
:::

6/19/2007 4:43:15 PMGeorge

:Thanks Terry,I found the site
:
:::Hello All, I am looking for an Atwater Kent tuning knob for a model 60, the one with the gear attached, has anyone come up with a gear that would fit the stem of the knob? or a knob with a good gear. I have the knob but the gear is broken, also looking for the inner cover plate, the one that fits over the tubes and tuning condenser, the model 60 has 3 mounting holes, the model 55 has 2 mounting holes, I need the one with the 3 holes, any help would be great, thanks george
::
::George,
::Try David Frush - www.parts2many@aol.com
::Terry
::