Does anyone have alignment instructions for Zenith model 5-S-29 (Chassis 5513)? The Rider's manuals only show schematic and parts list. This is a 3 band tombstone model radio.
thanks,
Steve

Below is the link to the Zenith 5-S-56, same chassis which has the extra page for alignment. Alignment is bit sketchy but apparently that is all Rider ever had.

http://www.nostalgiaair.org/Resources/893/M0024893.htm

Richard

:Below is the link to the Zenith 5-S-56, same chassis which has the extra page for alignment. Alignment is bit sketchy but apparently that is all Rider ever had.
:
:http://www.nostalgiaair.org/Resources/893/M0024893.htm
:
:Richard

Thanks Richard. I must have missed that last page when viewing the schematic. It is sketchy, but better than nothing. This one sure has an odd ball IF frequency. It should be fun bringing this one back to life. Gotta finish 5 more radios on the work bench first though! Ha!
Steve