::Does anyone have a junker chassis for my Philco 38-7?? Mine is missing all the little cones for the cone-matic tuning. Thanks
::Greg HI ! Where are you located , i do have one complete except for the outer escutcheon ring. STEFF
I have a special wrench that is used for adjusting the cones. (I bought if from somebody on the Internet who makes them out of a screwdriver.) If you do get replacement cones and want to borrow my wrench, let me know.
:Greg, I have one of those sets. The concentric tuning system works, but is a little goofy if you ask me. I think most people would just use the manual tuning.
:
:I have a special wrench that is used for adjusting the cones. (I bought if from somebody on the Internet who makes them out of a screwdriver.) If you do get replacement cones and want to borrow my wrench, let me know.
:Hi Greg, camera batteries down, being stored for too long, anyway the chassis of mine is a 38-7C from a console is it still what you need ?? . Ill get new batt for cam tomorrow. Regards, STEFF
:
:Greg, do need your e-mail address. Thanks, STEFF
:
:
:
: