Hi Guys,
I have a Philco model 87 and need a parts list to go with schematic I found on NA. Ther were 4 sheets all schematic but no parts list giving values of the numbered components. If anyone has a copy could you email it to me> Thanks in advance..Dave Zehnder

Hi David,

Get the schematic from Ron Ramirez's site. He has marked the part values on the schematic.

http://www.philcoradio.com/tech/schema.htm

Tony

:Hi Guys,
:I have a Philco model 87 and need a parts list to go with schematic I found on NA. Ther were 4 sheets all schematic but no parts list giving values of the numbered components. If anyone has a copy could you email it to me> Thanks in advance..Dave Zehnder

:Hi David,
:
:Get the schematic from Ron Ramirez's site. He has marked the part values on the schematic.
:
:http://www.philcoradio.com/tech/schema.htm
:
:Tony
:
::Hi Guys,
::I have a Philco model 87 and need a parts list to go with schematic I found on NA. Ther were 4 sheets all schematic but no parts list giving values of the numbered components. If anyone has a copy could you email it to me> Thanks in advance..Dave Zehnder

Thanks Tony that gives me lots more info. I have a power transformer that is bad in this chassis and I am trying to get specs for it to replace it. I think the philco part number is 3400-1. Riders gives the voltages for all the secondary and one is for 1.5v. There is a Hammond transformer that is close but it has a 6.3v. The Rider on NA had a hand written value of 350v, 350v, 5v, 2.5v, 2.5v and 1.5v. I would love to find a modern transformer to meet the specs but if necessary I'll try to find a donor chassis with a good transformer. Thanks Tony and Ron
::Hi David,
::
::Get the schematic from Ron Ramirez's site. He has marked the part values on the schematic.
::
::http://www.philcoradio.com/tech/schema.htm
::
::Tony
::
:::Hi Guys,
:::I have a Philco model 87 and need a parts list to go with schematic I found on NA. Ther were 4 sheets all schematic but no parts list giving values of the numbered components. If anyone has a copy could you email it to me> Thanks in advance..Dave Zehnder