Philco 42-1010 schematic for phonograph

2/23/2004 6:13:24 PMJoe Graniero

Was hoping someone might be able to help me find a
copy of the schematic of the phonograph portion of
the Phil 42-1010 - I have restored the cabinet/radio
and the Beam of Light, but the reworking of the mechanics of the phonograph needs to be done and I cant seem to find anything on that (idler, motor mounts
drive bell, etc) - thanks very mucy - Joe

2/23/2004 10:34:27 PMDave Froehlich

Joe,
I have worked on a few of those. Here is one website that can help:

http://www.philcorepairbench.com/phono.htm

There is another where someone use some plumbing parts and the solar cell from a calculator to get the turntable working.

I'll try to find the other page. Just a second. Here it is:

http://www3.sympatico.ca/belanger.eric/RadiosPHILCO_421008.htm

This is the same turntable that's in your set.
I hope that this helps.

Dave...
:Was hoping someone might be able to help me find a
:copy of the schematic of the phonograph portion of
:the Phil 42-1010 - I have restored the cabinet/radio
:and the Beam of Light, but the reworking of the mechanics of the phonograph needs to be done and I cant seem to find anything on that (idler, motor mounts
:drive bell, etc) - thanks very mucy - Joe

2/24/2004 4:59:23 AMJoe Graniero

Dave -

USed the first two sites to redo the Beam of
Light portion - that is working great - but the
last site was one I didnt see before, looks like
a winner - Thanks very much - Joe

9/7/2005 9:42:42 AMJon Scaptura

:http://www3.sympatico.ca/belanger.eric/RadiosPHILCO_421008.htm

This site referenced above doesn't exist anymore. Does anyone know where it has moved to, or where I can find a breakdown of the changer in the 42-1010 console? I'm looking for exploded view of the changer mechanism.

2/25/2004 9:19:59 AMChuck Schwark

:Was hoping someone might be able to help me find a
:copy of the schematic of the phonograph portion of
:the Phil 42-1010 - I have restored the cabinet/radio
:and the Beam of Light, but the reworking of the mechanics of the phonograph needs to be done and I cant seem to find anything on that (idler, motor mounts
:drive bell, etc) - thanks very mucy - Joe

Hi Joe,

I can provide high-quality photocopies of the service info for the 42-1010, which includes the phono mecanism as well. See the details on the SCHEMATIC INFO page of my site.

Regards,

Chuck Schwark
The Philco Repair Bench
www.philcorepairbench.com