Hello all,
I have a Philco 89 code 121 that I need to replace the 2 filter caps in. On the schematics it just references number 44 and number 46. I have not been able to find the model 89 parts list to find out the values of these two caps. Any help would be greatly appreciated.

Dean

Go to this site, look on the left side for "Philco Parts Values" (or something like that) and you should find info on the capacitor blocks. http://www.philcorepairbench.com/
You might want to browse thru the site as it has a plethora of great Philco info.

:Hello all,
: I have a Philco 89 code 121 that I need to replace the 2 filter caps in. On the schematics it just references number 44 and number 46. I have not been able to find the model 89 parts list to find out the values of these two caps. Any help would be greatly appreciated.
:
:Dean

Thanks Gordo,
The values I need are probably listed there but, I forgot to say in my previous post that, all the markings on the caps are rubbed/worn off so I can't use any part numbers. The values that they list are about 4 to 14 mfd. so I believe I would be OK by replacing them with a couple of 10's and be done with it. Any thoughts?

:Go to this site, look on the left side for "Philco Parts Values" (or something like that) and you should find info on the capacitor blocks. http://www.philcorepairbench.com/
: You might want to browse thru the site as it has a plethora of great Philco info.
:
::Hello all,
:: I have a Philco 89 code 121 that I need to replace the 2 filter caps in. On the schematics it just references number 44 and number 46. I have not been able to find the model 89 parts list to find out the values of these two caps. Any help would be greatly appreciated.
::
::Dean

I should think that 10MFD at 450v should work OK ... looks like the original were 6 to 8 mfd