Your RCA 19K is better than most radios with a RF stage and push-pull output. It has 9 tubes a lot of others have 5. The radio was built in 1940.
Norm
: I need the volume/on-off knob for an RCA Victor model 19K radio. I also need a station indicator needlefor this model. I would like to know if this is a good radio and how old it is. A schematic and parts list would help too.
: Thanks!
: Jason
: I need the volume/on-off knob for an RCA Victor model 19K radio. I also need a station indicator needlefor this model. I would like to know if this is a good radio and how old it is. A schematic and parts list would help too.
: Thanks!
: Jason
: The schematic has been sent.
: : I need the volume/on-off knob for an RCA Victor model 19K radio. I also need a station indicator needlefor this model. I would like to know if this is a good radio and how old it is. A schematic and parts list would help too.
: : Thanks!
: : Jason
Listed as being a 1940 radio in Collectors Guide to Antique Radios.
Norm
::Can't find any specific info about RCA model 19K, what year was this manufactured?
::
::: The schematic has been sent.
::
::: : I need the volume/on-off knob for an RCA Victor model 19K radio. I also need a station indicator needlefor this model. I would like to know if this is a good radio and how old it is. A schematic and parts list would help too.
::: : Thanks!
::: : Jason
::
::I need all the knbs, can anyone help with this?
:
Part numbers for knobs aren't given on schematics. You might check with AES, tubesandmore.com . They sell replacement knobs although they won't be exactly like the original.
Norm
::Hi Dana
::
:: Listed as being a 1940 radio in Collectors Guide to Antique Radios.
::
::Norm
::
::::Can't find any specific info about RCA model 19K, what year was this manufactured?
::::
::::: The schematic has been sent.
::::
::::: : I need the volume/on-off knob for an RCA Victor model 19K radio. I also need a station indicator needlefor this model. I would like to know if this is a good radio and how old it is. A schematic and parts list would help too.
::::: : Thanks!
::::: : Jason
::::
::::I need all the knbs, can anyone help with this?
:::If you have the schematic, does it give a part number for the knobs???
: