EICO model 232 VTVM
5/1/2012 8:14:51 PMMitch(100460:0)
Hello everyone,
In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
email posted.
Thank you for being a part of NA.
Mitch
5/1/2012 10:45:13 PMWarren(100463:100460)
And the manual for it is here.
http://bama.edebris.com/manuals/eico/232/
5/4/2012 7:28:06 PMWayne Evers(100490:100460)
:Hello everyone,
:
:In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:
:I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:
:The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:
:I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:
:email posted.
:
:Thank you for being a part of NA.
:
:Mitch
:
:
:
:
:In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:
:I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:
:The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:
:I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:
:email posted.
:
:Thank you for being a part of NA.
:
:Mitch
:
:
:
5/5/2012 10:41:20 AMdoug(100503:100460)
:Hello everyone, still have vtvm
:
:In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:
:I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:
:The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:
:I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:
:email posted.
:
:Thank you for being a part of NA.
:
:Mitch
:
:
:
:
:In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:
:I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:
:The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:
:I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:
:email posted.
:
:Thank you for being a part of NA.
:
:Mitch
:
:
:
5/5/2012 5:30:52 PMMitch(100512:100503)
::Hello everyone, still have vtvm
::
::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::
::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::
::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::
::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::
::email posted.
::
::Thank you for being a part of NA.
::
::Mitch
::
::
::
:
:
There were two attempted posts for this, neither posts left a message, would you like to try again?
::
::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::
::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::
::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::
::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::
::email posted.
::
::Thank you for being a part of NA.
::
::Mitch
::
::
::
:
:
There were two attempted posts for this, neither posts left a message, would you like to try again?
Mitch
5/6/2012 1:27:45 AMVinny(100519:100512)
:::Hello everyone, still have vtvm
:::
:::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::
:::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::
:::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::
:::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::
:::email posted.
:::
:::Thank you for being a part of NA.
:::
:::Mitch
:::
:::
:::
::
::
:There were two attempted posts for this, neither posts left a message, would you like to try again?
:
:Mitch
:
Mitch, a generous offer, does it have the probe? If so I will take it.
Vin
:::
:::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::
:::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::
:::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::
:::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::
:::email posted.
:::
:::Thank you for being a part of NA.
:::
:::Mitch
:::
:::
:::
::
::
:There were two attempted posts for this, neither posts left a message, would you like to try again?
:
:Mitch
:
Mitch, a generous offer, does it have the probe? If so I will take it.
Vin
5/6/2012 12:33:21 PMMitch(100523:100519)
::::Hello everyone, still have vtvm
::::
::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::
::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::
::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::
::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::
::::email posted.
::::
::::Thank you for being a part of NA.
::::
::::Mitch
::::
::::
::::
:::
:::
::There were two attempted posts for this, neither posts left a message, would you like to try again?
::
::Mitch
::
:Mitch, a generous offer, does it have the probe? If so I will take it.
:Vin
:
There is no probe, you will have to make one.
::::
::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::
::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::
::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::
::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::
::::email posted.
::::
::::Thank you for being a part of NA.
::::
::::Mitch
::::
::::
::::
:::
:::
::There were two attempted posts for this, neither posts left a message, would you like to try again?
::
::Mitch
::
:Mitch, a generous offer, does it have the probe? If so I will take it.
:Vin
:
There is no probe, you will have to make one.
5/6/2012 12:35:05 PMVinny(100524:100523)
:::::Hello everyone, still have vtvm
:::::
:::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::::
:::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::::
:::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::::
:::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::::
:::::email posted.
:::::
:::::Thank you for being a part of NA.
:::::
:::::Mitch
:::::
:::::
:::::
::::
::::
:::There were two attempted posts for this, neither posts left a message, would you like to try again?
:::
:::Mitch
:::
::Mitch, a generous offer, does it have the probe? If so I will take it.
::Vin
::
:There is no probe, you will have to make one.
:
Mitch, thank you but I'm going to pass on it.
Vin
:::::
:::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::::
:::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::::
:::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::::
:::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::::
:::::email posted.
:::::
:::::Thank you for being a part of NA.
:::::
:::::Mitch
:::::
:::::
:::::
::::
::::
:::There were two attempted posts for this, neither posts left a message, would you like to try again?
:::
:::Mitch
:::
::Mitch, a generous offer, does it have the probe? If so I will take it.
::Vin
::
:There is no probe, you will have to make one.
:
Mitch, thank you but I'm going to pass on it.
Vin
5/9/2012 4:02:17 PMDon Ferguson(100569:100524)
::::::Hello everyone, still have vtvm
::::::
::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::::
::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::::
::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::::
::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::::
::::::email posted.
::::::
::::::Thank you for being a part of NA.
::::::
::::::Mitch
::::::
::::::
::::::
:::::
:::::
::::There were two attempted posts for this, neither posts left a message, would you like to try again?
::::
::::Mitch
::::
:::Mitch, a generous offer, does it have the probe? If so I will take it.
:::Vin
:::
::There is no probe, you will have to make one.
::
:Mitch, thank you but I'm going to pass on it.
:Vin
:
Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
Hit me on my email and I will be glad to pay shipping.
Don
donfergy@att.net
::::::
::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::::
::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::::
::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::::
::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::::
::::::email posted.
::::::
::::::Thank you for being a part of NA.
::::::
::::::Mitch
::::::
::::::
::::::
:::::
:::::
::::There were two attempted posts for this, neither posts left a message, would you like to try again?
::::
::::Mitch
::::
:::Mitch, a generous offer, does it have the probe? If so I will take it.
:::Vin
:::
::There is no probe, you will have to make one.
::
:Mitch, thank you but I'm going to pass on it.
:Vin
:
Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
Hit me on my email and I will be glad to pay shipping.
Don
donfergy@att.net
5/9/2012 4:23:06 PMMitch(100571:100569)
:::::::Hello everyone, still have vtvm
:::::::
:::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::::::
:::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::::::
:::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::::::
:::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::::::
:::::::email posted.
:::::::
:::::::Thank you for being a part of NA.
:::::::
:::::::Mitch
:::::::
:::::::
:::::::
::::::
::::::
:::::There were two attempted posts for this, neither posts left a message, would you like to try again?
:::::
:::::Mitch
:::::
::::Mitch, a generous offer, does it have the probe? If so I will take it.
::::Vin
::::
:::There is no probe, you will have to make one.
:::
::Mitch, thank you but I'm going to pass on it.
::Vin
::
:Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
:Hit me on my email and I will be glad to pay shipping.
:Don
:donfergy@att.net
:
:
Don, The meter has been comitted. thank you for the interest.
:::::::
:::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
:::::::
:::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
:::::::
:::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
:::::::
:::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
:::::::
:::::::email posted.
:::::::
:::::::Thank you for being a part of NA.
:::::::
:::::::Mitch
:::::::
:::::::
:::::::
::::::
::::::
:::::There were two attempted posts for this, neither posts left a message, would you like to try again?
:::::
:::::Mitch
:::::
::::Mitch, a generous offer, does it have the probe? If so I will take it.
::::Vin
::::
:::There is no probe, you will have to make one.
:::
::Mitch, thank you but I'm going to pass on it.
::Vin
::
:Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
:Hit me on my email and I will be glad to pay shipping.
:Don
:donfergy@att.net
:
:
Don, The meter has been comitted. thank you for the interest.
Regards,
Mitch
5/9/2012 4:24:39 PMMitch(100572:100571)
::::::::Hello everyone, still have vtvm
::::::::
::::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::::::
::::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::::::
::::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::::::
::::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::::::
::::::::email posted.
::::::::
::::::::Thank you for being a part of NA.
::::::::
::::::::Mitch
::::::::
::::::::
::::::::
:::::::
:::::::
::::::There were two attempted posts for this, neither posts left a message, would you like to try again?
::::::
::::::Mitch
::::::
:::::Mitch, a generous offer, does it have the probe? If so I will take it.
:::::Vin
:::::
::::There is no probe, you will have to make one.
::::
:::Mitch, thank you but I'm going to pass on it.
:::Vin
:::
::Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
::Hit me on my email and I will be glad to pay shipping.
::Don
::donfergy@att.net
::
::
:Don, The meter has been comitted. thank you for the interest.
:
:Regards,
:Mitch
:
Wayne,
::::::::
::::::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::::::
::::::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::::::
::::::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::::::
::::::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::::::
::::::::email posted.
::::::::
::::::::Thank you for being a part of NA.
::::::::
::::::::Mitch
::::::::
::::::::
::::::::
:::::::
:::::::
::::::There were two attempted posts for this, neither posts left a message, would you like to try again?
::::::
::::::Mitch
::::::
:::::Mitch, a generous offer, does it have the probe? If so I will take it.
:::::Vin
:::::
::::There is no probe, you will have to make one.
::::
:::Mitch, thank you but I'm going to pass on it.
:::Vin
:::
::Greetings, if the VTVM is still available, I will take it. I already have homebrew probes for this meter.
::Hit me on my email and I will be glad to pay shipping.
::Don
::donfergy@att.net
::
::
:Don, The meter has been comitted. thank you for the interest.
:
:Regards,
:Mitch
:
Wayne,
Check your email.
Mitch
1/29/2013 4:10:10 AMLeonard Legg(104515:100519)
Hello Mitch:
This is a little strange and I have no Idea if you will get this or when it was posted or if you still have it. I bought one to rebuild to use to tune finals on a tube type ham rig. The transformer was fried. If you still have this one I would be tickled to get it. I would then also have quite a spare parts supply for it. I don't mind replacing the caps, since I have already done that for this one. Let me know.
Thanks
Leonard
::::Hello everyone, still have vtvm
::::
::::In a multiple purchase i got this VTVM with the analyser i wanted. I have no need for this VTVM as I have one that I use already.
::::
::::I powered this VTVM up and it works. It is original including the 50 year old battery. The DC + and - are about 1/2 volt off, the AC needs calibration, almost 30 % off. The calibration pots do adjust. I did not bother with the Ohms, the battery is rusted.
::::
::::The meter zeros and works, the wafers need to be cleaned. AC leakage is suppected. All of the capacitors should be changed.
::::
::::I do not sell radios or instruments on this site nor ebay. I am offering this VTVM to anyone who would like it for free except my shipping costs. If you want it just send me my shipping costs after you receive it. My postal code is 27253.
::::
::::email posted.
::::
::::Thank you for being a part of NA.
::::
::::Mitch
::::
::::
::::
:::
:::
::There were two attempted posts for this, neither posts left a message, would you like to try again?
::
::Mitch
::
:Mitch, a generous offer, does it have the probe? If so I will take it.
:Vin
: