Home  Resources  References  Tubes  Forums  Links  Support  Sale 

Tube Substitutions for:
6L6GX
Beam Power Amplifier
TypeSubstitutesBase Diagram
6L6GX6L6A, 6L6G, 6L6GA, 6L6GAY, 6L6GB, 6L6GC, 6L6GT, 6L6, 6L6Y, 5881, 7581, 7581A
Web References6L6GX @ RadioMuseum.org
Sylvania Type 6L6GC
BEAM POWER AMPLIFIER



MECHANICAL DATA

Bulb T-12
Base Short Medium Shell Octal 6-Pin
Basing 7S
Cathode Coated Unipotential
Mounting Position Any


ELECTRICAL DATA


HEATER CHARACTERISTICS
Heater Voltage 6.3 Volts
Heater Current 0.9 Amps

DIRECT INTERELECTRODE CAPACITIES (Unshielded)
Grid No. 1 to Plate 0.6 ��f
Input 10 ��f
Output 6.5 ��f

MAXIMUM RATINGS (Design Maximum Values)
Class AB1 Pentode Operation (Single Tube)
Plate Voltage 250 400 Volts
Grid No. 2 Voltage 250 300 Volts
Grid No. 1 Voltage -14 . . . Volts
Cathode Resistor . . . 200 Ohms
Peak A-F Grid Voltage 14 28 Volts
Zero Signal Plate Current 72 112 Ma
Max. Signal Plate Current 79 128 Ma
Zero Signal Grid No. 2 Current 5 7 Ma
Max. Signal Grid No. 2 Current 7.3 16 Ma
Transconductance 6000 . . . �mhos
Plate Resistance (approx.) 22500 . . . Ohms
Load Resistance 2500 66001 Ohms
Power Output 6.5 32 Watts
Total Harmonic Distortion 10 2.0 Percent
Class AB1 Pentode Operation (Push-Pull)
Plate Voltage 330 400 450 Volts
Grid No. 2 Voltage 330 300 350 Volts
Grid No. 1 Voltage -24 -25 -30 Volts
Peak A-F Grid Voltage 24 25 30 Volts
Zero Signal Plate Current 122 102 95 Ma
Max. Signal Plate Current 184 152 194 Ma
Zero Signal Grid No. 2 Current 5.6 6 3.5 Ma
Max. Signal Grid No. 2 Current 18.5 17 19.2 Ma
Transconductance 6000 ... ... �mhos
Plate Resistance (approx.) 22500 . . . . . . Ohms
Load Resistance 45001 66001 60001 Ohms
Power Output 31.5 34 50 Watts
Total Harmonic Distortion 1.0 2.0 1.5 Percent
Class AB1 Ultra-Linear Operation
Plate and Grid NO. 2 Supply Voltage 410 Volts
Cathode Resistor 220 Ohms
Peak A-F Grid Voltage 34 Volts
Zero Signal Cathode Current 134 Ma
Max. Signal Cathode Current 155 Ma
Load Resistance (PL to PL) 8000 Ohms
Power Output 24 Watts
Total Harmonic Distortion 1.6 Percent

NOTES:

1 Plate to Plate.
2 Grid No. 2 at 43% of Primary Winding.

APPLICATION

The Sylvania Type 6L6GC is a power output tube capable of furnishing 50 Watts of power output at very low distortion when operated as Push-Pull AB1 Amplifiers.



© 1996-2021 Nostalgia Air