Home  Resources  References  Tubes  Forums  Links  Support  Sale 

Tube Substitutions for:
6BQ7A
VHF Medium-mu Duo Triode
TypeSubstitutesBase Diagram
6BQ7A6BC8, 6BZ7, 6BK7*, 6BZ8, 6CH7, 6CX7, 6BQ7, 6BS8, 6BX8, 6HK8, X155, 6BK7A*, 6BK7B*
Notes:* - Parallel filaments
Web References6BQ7A (Mazda-Belvu) @ Franks Electron Tubes
6BQ7A (Tung-Sol) @ Franks Electron Tubes
6BQ7A (Brimar) @ Franks Electron Tubes
6BQ7A @ RadioMuseum.org
Sylvania Type 6BQ7A
VHF DUO TRIODE



MECHANICAL DATA

Bulb T-61/2
Base Small Button 9-Pin
Basing 9AJ
Mounting Position Any


ELECTRICAL DATA


HEATER CHARACTERISTICS
Heater Voltage 6.3 Volts
Heater Current 400 Ma
Maximum Peak Heater-Cathode Voltage 200 Volts

DIRECT INTERELECTRODE CAPACITIES (Shielded)1
Grid to Plate 1.2 1.2 ��f
Input 2.6   ��f
Output 1.2   ��f
Plate to Cathode 0.12 0.12 ��f
Heater to Cathode 2.6 2.6 ��f
Plate to Plate 0.010 0.010 ��f
Plate Section 2 Plate and Grid Section 1 0.024 0.024 ��f
Grounded Grid Operation
Input 5.0 ��f
Output 2.2 ��f

MAXIMUM RATINGS (Design Center Values) Each Section
Plate Voltage 250 Volts
Plate Dissipation 2 Watts
Cathode Current 20 Ma
Grid Circuit Resistance 0.5 Megohm

CHARACTERISTICS AND TYPICAL OPERATION
CLASS A1 AMPLIFIER (Each Section)
Plate Voltage 150 Volts
Cathode Bias Resistor 220 Ohms
Plate Current 9 Ma
Transconductance 6400 �mhos
Amplification Factor 38 X
Grid Voltage for Ib=100�a (approx.) -6.5 Volts
Direct Coupled R F Grounded Grid Operation4
  Section 1 Section 2  
Plate Supply Voltage 250 250 Volts
Plate Voltage 135 115 Volts
Negative Grid Voltage -1   Volts
Cathode Bias Resistor 100   Ohms
Grid Resistor   0.5 Megohm
Plate Current 10 10 Ma
Grid Current 0 0 Ma
Grid Voltage for Ib=10�a (approx.) -14   Volts
Push-Pull R F Grounded Grid Operation
Plate Voltage 150 Volts
Grid Voltage -2 Volts
Cathode Bias Resistor (Common to both sections) 100 Ohms
Plate Current 10 Ma

NOTES:

1 RETMA shield No. 315
2 Section No. 1 connects to Pins 6, 7 and 8. Section No. 2 connects to Pins 1, 2 and 3.
3 Under cutoff conditions, in r f grounded grid circuits with direct coupled drive, this voltage may be as high as 300 volts.
4 Section No. 1 (Driver) is directly coupled to Section No. 2 (Driven Grounded Grid Amplifier)

APPLICATION

Sylvania Type 6BQ7A is a miniature, medium mu, twin triode intended for service as the first amplifier in tuners or v h f television receivers or other applications require a high gain, low noise twin triode amplifier. The type 6BQ7A is considered a replacement for Type 6BQ7.



© 1996-2021 Nostalgia Air