| < Previous Message | Index | Next Message > |
| Drill out the hole from the top of the dial. Use a ballpoint pens barrel that will fit over the tuners shaft, and fit the inside diameter of the hole you drilled in the dial. Cut a slot in the barrel where it fits over the tuner shaft. Use the original spring clip again. cut the pen barrel to the right length, epoxy to the underside of the dial in the hole. Hope you got all that. That's what I had to do with a similar dial that was half hidden like yours. IPAddress: ***.81.196.9 |
| Crackling problem solved, but can't receive stations. | |
| < Previous Message | Index | Next Message > |