| < Previous Message | Index | Next Message > |
| ::Terry: ::Just to make this as simple as possible... is the osc running or not? :: ::To find out.. just place your scope probe tip near to the osc coil. :: ::You don't need to inject anything from the sig gen.. just turn on the radio and put the probe near there. :: ::The osc will be 455kc higher than the dial. ::Whatever your dial pointer happens to be at... say 770kc...the osc freq will be at 1225kc :: ::So the first ting is to set your vert sensitivity low enough to pick up any oscillations in the coil. ::Let's just see if it's oscillating at all. :: :: ::IPAddress: ***.115.81.106Wl : :No- the osc is not working. :AND- the last time I removed it from the case, a little while ago, the tuning dial broke into pieces. It is non-repairable, and non-replacable. There's really no reason to pursue this any further. I'm sorry, I feel like I let you down. :I can't thank you enough for your time, effort and support. :Ugh! :This is REALLY a bummer! :Goodnite- :terry : :IPAddress: ***.28.48.106
|
| Crackling problem solved, but can't receive stations. | |
| < Previous Message | Index | Next Message > |