| < Previous Message | Index | Next Message > |
| :Terry: :Just to make this as simple as possible... is the osc running or not? : :To find out.. just place your scope probe tip near to the osc coil. : :You don't need to inject anything from the sig gen.. just turn on the radio and put the probe near there. : :The osc will be 455kc higher than the dial. :Whatever your dial pointer happens to be at... say 770kc...the osc freq will be at 1225kc : :So the first ting is to set your vert sensitivity low enough to pick up any oscillations in the coil. :Let's just see if it's oscillating at all. : : :IPAddress: ***.115.81.106Wl No- the osc is not working. |
| Crackling problem solved, but can't receive stations. | |
| < Previous Message | Index | Next Message > |