| I have a home brew 1920’s radio. I drew a schematic of this radio which is included below with some pictures. The tuning condensers may not be shown correctly but this seemed to be what I trace out with my Fluke. One of the tuning condensers has the name of Univerier on it. I have a couple of wires that are not hooked to anything and are labeled with?????. I’m not sure of how to connect the batteries. I believe the filament should be a 3 volt battery and the plate should be a 45 volt battery. The tubes are missing. I’m guessing that they should be UV-199’s. I’m not sure of where the headset should connect. Can anyone give me some guidance in getting this radio playing again? Also where can I purchase three tubes? Thanks Steve
|
| 1920's Home Brew Radio | |
 Steve | |
 Edd | |
| Steve | |
| Steve | |
| Steve |
| Index | Next Message > |