| ...Also, I discovered that page 3 gives the pin-out of the oscillator coil, which may help. In studying both Peter's schematic and the schematic listed on this website (that are the same) http://www.nostalgiaair.org/PagesByModel/699/M0007699.pdf I noticed that there's no 120 ohm resistor in series with the grid circuit of the oscillator coil, even though you show it on your chassis. Seems I remember having this strange damping resistor in the oscillator of my chassis, too. I'm not sure of its exact purpose, and maybe it isn't supposed to be there (my memory may be wrong). Try shorting across the 120 ohm resistor to see if the oscillator will function better without it. T.
IPAddress: ***.254.163.97 |