If your tube tester transformer has a tap for 117V tubes, it should work as a very low power isolation transformer. Probably less than 50W, however.
Rich:Hi:
:
:Not that I know of. You need the proper turns ratio to get 115VAC isolated from the line.
:
:I would get on ebay and look for one, or perhaps on Craigslist. you'd be surprised at how cheap someone could let one go for, if they are not using it.
:
:Lou
:
::Can I use a transformer from a tube tester or old radio to build my own Isolation transformer?
::
:
:
IPAddress: ***.122.211.149 |
Mark 
John Kogel