| You say that both the screens and the plate are at 80 volts. According to the schematic they are supposed to be at 90 volts. If the B+ wire connects to one side of the IF transformer primary, and then continues on to the screen grid terminal, be sure that the wire that connects to the screen grid terminal (pin 6) indeed connects to the B+ terminal of the IF primary and not the plate terminal. Else if both the plate and the screen grid are connected -through- the IF transformer, there will be reduced voltage, and a malfunction of the oscillator may result, with this tuned circuit in its path. T.
IPAddress: ***.254.163.97 |