| Why don't you leave the tube in the circuit and add two solid state diodes in series with each plate and the power transformer. If there is a plate to plate short in the tube, the diodes will protect the power transformer. You will also still have the voltage drop of the tube. The B+ would still have the correct voltage. IPAddress: ***.136.255.55 |
| 6X5 Solid State Replacement | |
 Steve Bento | |
  Lou | |
 Doug Criner | |
| Lou | |
| John Kogel | |
| Steve Bento | |
| Steve Bento | |
| John | |
| Andy | |
| Andy | |
| Andy | |
| Steve Bento | |
| Norm Leal | |
| Steve Bento | |
| Doug Criner | |
| Steve Bento | |
| Tom | |
| Steve Bento |
| < Previous Message | Index | Next Message > |