Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
6X5 Solid State Replacement

Posted by John Kogel on 05/23/2012 22:30

:Yes - good advice. Double the rating to account for tolerances and ambient temp.
:
:But Doug took the words right out of my mouth!! Why bother? The 6X5 rectifier is one of the CHEAPEST tubes you can find, and it is readily available too.
:
::Lou, advises adding a margin to the I^2R power resistor rating. I would double it.
::
::Not sure what you're up to - but NOS 6X5s go for about $5.
::
:
:
And here's a word of warning. If you wire diodes to a plug that plugs into a tube socket, don't forget that any exposed connections will be carrying lethal voltages on top of the chassis. Shock hazard.

IPAddress: ***.108.81.52


6X5 Solid State Replacement 
Steve Bento 05/23/2012 10:39 
Lou 05/23/2012 16:01 
Doug Criner 05/23/2012 18:19 
Lou 05/23/2012 21:30 
John Kogel 05/23/2012 22:30 
Steve Bento 05/24/2012 08:25 
Steve Bento 05/24/2012 09:04 
John 05/24/2012 18:16 
Andy 05/23/2012 22:59 
Andy 05/24/2012 05:37 
Andy 05/24/2012 17:02 
Steve Bento 05/24/2012 09:02 
Norm Leal 05/24/2012 12:02 
Steve Bento 05/24/2012 13:44 
Doug Criner 05/24/2012 17:48 
Steve Bento 05/25/2012 13:15 
Tom 05/25/2012 08:36 
Steve Bento 05/25/2012 13:09 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air