Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index    


Antique Radio Technical Forum
rating of transformer at 2 volt amps

Posted by Lewis L on 07/05/2009 20:01

:I think also that Class II xfmrs are inherently protected against a short or overload due to the winding impedance. So, they don't have to be fused (e.g., doorbell xfmr).
:Doug


You are right, Doug. The class II wiring is for telephones, stereo speakers, intercoms, security systems, etc. The class I wiring is for the 120/240 house wiring and has a compeletly different set of regulations that have to be followed when wiring that.
Lewis


rating of transformer at 2 volt amps 
Robert 07/03/2009 14:47 
Bob Masse 07/03/2009 15:13 
Doug Criner 07/03/2009 15:22 
Robert 07/03/2009 15:53 
Lewis L 07/03/2009 16:19 
Robert 07/03/2009 16:25 
Lewis L 07/03/2009 17:59 
Doug Criner 07/03/2009 21:11 
Doug Criner 07/03/2009 21:37 
Lewis L 07/04/2009 13:35 
Robert 07/04/2009 20:01 
Doug Criner 07/05/2009 09:38 
Robert 07/05/2009 21:29 
Lewis L 07/05/2009 10:38 
Lewis L 07/05/2009 10:39 
Edd 07/05/2009 13:17 
Doug Criner 07/05/2009 14:52 
Lewis L 07/05/2009 18:58 
Lewis L 07/05/2009 19:58 
Lewis L 07/05/2009 19:58 
Lewis L 07/05/2009 20:01 
Radiodoc 07/09/2009 22:17 
Lewis L 07/10/2009 10:41 
Lewis L 07/10/2009 11:16 
Doug Criner 07/10/2009 16:41 
Radiodoc 07/10/2009 16:46 

   < Previous Message Index    




© 1996-2004 Nostalgia Air