Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
zenith t.o. h-500 bcb sia switch

Posted by Walt on 07/02/2009 18:00

Is SIA meaning STA, as in 'stations'? The 1R5 should be OK on the broadcast band, but will operate poorly on the higher SW bands.
Deoxit is good stuff, but it can't perform miracles. The switch contacts might have a hard, black oxidation on them. You may have to dismantle the switch and rub the deposit off gently. The contact terminals may be worn and sprung, you may need to bend them together slightly for contact. When actuating the switch, you should see them move ever so slightly, this means that they are touching the contact stem.
Take your time and be careful, the coil rack area and winding leads are very delicate.


zenith t.o. h-500 bcb sia switch 
jim 07/02/2009 16:58 
Doug Criner 07/02/2009 17:39 
Walt 07/02/2009 18:00 
Lewis L 07/02/2009 18:05 
jim 07/02/2009 20:43 
jim 07/02/2009 20:55 
Doug Criner 07/05/2009 16:17 
Joe 07/02/2009 18:28 
JIM 07/02/2009 21:04 
SteveB 07/06/2009 08:27 
Bill G. 07/06/2009 08:59 
Radiodoc 07/07/2009 16:44 
Joe 07/07/2009 17:20 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air