Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
Filter Cap Ground Connection Wilcox Gay 1J10

Posted by Here "Are" the remaining questions..any on 03/29/2009 15:55

This set has some White "chalky-like" regular caps. Are these ceramic caps? They resemble about a 1 inch stubby white crayon. Stamped in black there is for instance a 220K 100 mmf
As well as larger caps like .005 and a dual .0001 mfd.

Three of the caps have a wire wound around one end
a couple of times. I have to replace C11 (470K .005) like this.
Should I just wind the wire around so it does the
same thing on the new replacement?

Do the schematic drawings for the negative filter cap ends denote anything different with it's forked like end to the ground symbol?



Filter Cap Ground Connection Wilcox Gay 1J10 
Bob E. 03/28/2009 23:39 
Bob E. Here is the Questions 03/28/2009 23:50 
Peter G. Balazsy 03/29/2009 01:23 
Bob E. 03/29/2009 13:14 
Here "Are" the remaining questions..any  03/29/2009 15:55 
Bill VA 03/29/2009 20:26 
Bill VA 03/29/2009 20:32 
Bob E 03/29/2009 21:59 
Bill VA 03/30/2009 00:33 
Bob E. Hey Bill Follow up :O) 03/30/2009 01:00 
Jon 03/30/2009 06:44 
Bill VA 03/30/2009 11:31 
Bob E 03/30/2009 15:11 
Bob E. 03/30/2009 09:27 
Marv Nuce 03/30/2009 00:43 
Ceramic Caps 03/30/2009 08:55 
Bob E. 03/30/2009 09:11 
Edd 03/30/2009 19:27 
Bill VA 03/30/2009 21:12 
THANKS! Edd and Bill !! 03/30/2009 23:29 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air