Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
Zenith T825: No FM, just static

Posted by Bill G. on 02/14/2008 17:55

:I cannot view the schematic on my computer. However, judging from similar circuits, bad fixed mica capacitors in the FM section of the IF transformers COULD affect the FM without affecting the AM. If they were to become intermittantly open, their capacitances are so small as to probably not affect the AM portion of the IF transformer much, but they will greatly affect the FM portion. This isn't necessarily your problem, but it is a possibility.
:
:Other possibilities would be components that are particular to FM-only sections of the radio; namely capacitors. If the radio has a separate FM front end, trouble could lie there, and it could also lie in the discriminator circuit.
:
:It'll be easiest to tell once Edd finds a schematic, but I wouldn't rule out IF transformers. The impedances of the FM portions, which are supposedly in series with the AM portions (from what I've read), are low enough to almost completely bypass the very small parallel capacitances at the AM IF frequency.
:
:T.

Hi All,
Look at the descriminator IF. That can be totally fried and AM will work fine.

Best Regards,

Bill Grimm



Zenith T825: No FM, just static 
Mark Johansson 02/13/2008 17:12 
{:o)<= 02/14/2008 16:12 
Edd 02/14/2008 16:55 
Thomas Dermody 02/14/2008 17:37 
Bill G. 02/14/2008 17:55 
mark Johansson 02/15/2008 12:47 
Bill G. 02/15/2008 13:43 
Mark Johansson 02/19/2008 22:28 
Bill G. 02/20/2008 08:33 
Mark Johansson 02/20/2008 22:38 
Bill G. 02/22/2008 15:34 
Thomas Dermody 02/22/2008 17:42 
Al R. 04/14/2009 09:18 
Bill G. 04/14/2009 09:55 
Al 04/14/2009 12:37 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air