Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
odd molded mica capacitor code

Posted by Chuck Schwark on 02/27/2004 15:11

:Chuck,
: This set has zero reception. Amplifier is quite alive and so is the detector. I have replaced all paper and filter capacitors. I have checked all voltages and they are correct. All resistors are correct. Everything is connected to where it's supposed to be connected to. No coils are open. Tubes are all good. I have tried to get to the band switch the best I can to clean it, although it seems to be OK. There are no plates in the tuning capacitor that are touching. Where do I look next?
: This is extremely frustrating.
:
:Thanks,
:
:Dave...

Sounds like an open RF or osc or IF coil or coils. Check all the coils for continuity.

Chuck


odd molded mica capacitor code 
Dave Froehlich 02/27/2004 02:07 
Chuck Schwark 02/27/2004 09:16 
Chuck Schwark 02/27/2004 09:18 
Dave Froehlich 02/27/2004 11:03 
Dave Froehlich 02/27/2004 11:59 
Chuck Schwark 02/27/2004 15:11 
Dave Froehlich 02/28/2004 21:13 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air