Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
L-49B Ballast tube. What are the resistor values inside?

Posted by Warren on 01/13/2010 23:32

3 & 8 = 150 8 & 7 = 40 You could use an 8.2 MFD.at 160 VAC from pins 3 to 7 .. This capacitor will fit inside the original ballast tube. For the dial lamp. Use a #44, lift the heater ground from the last tube in the string, add now the lamp in series from the heater to ground. Shunt the lamp with a 47 ohm 1 watt resistor. This works perfect.

IPAddress: ***.24.247.210


L-49B Ballast tube. What are the resistor values inside? 
Dave Froehlich 01/13/2010 20:42 
Warren 01/13/2010 23:32 
Dave Froehlich 01/14/2010 17:01 
Warren 01/14/2010 19:05 
Warren (P/S) 01/14/2010 20:39 
Dave Froehlich 01/15/2010 16:31 
Warren 01/15/2010 17:04 
Dave Froehlich 03/17/2010 15:00 
Warren 03/17/2010 15:32 
Dave Froehlich 03/17/2010 15:49 
Dave Froehlich 03/17/2010 15:50 
Dave Froehlich 04/27/2010 15:15 
Warren 04/27/2010 16:00 
Dave Froehlich 04/27/2010 16:12 
Dave Froehlich 04/27/2010 17:03 
Warren ( That's cool then ) 04/27/2010 19:46 
Warren 04/27/2010 17:18 
Dave Froehlich 04/27/2010 15:21 
Chuck 02/09/2010 02:04 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air