Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 

   < Previous Message Index    

Antique Radio Technical Forum
Moisture in Radio

Posted by Lewis L on 04/19/2009 13:04

:The most common way is to pre heat your home oven to about 200 . Turn it off and let the chassis sit inside for a few hours. The trick is not too hot as to hurt or melt anything.

I worked in several avionics shops at Delta. We washed almost everything in an ultrasonic cleaner, the put in a temperature controlled oven at 150 degrees overnight. I have done hundreds of boxes this way, and never seen a problem caused by this method.

Moisture in Radio 
Lawrence Goldy 04/19/2009 12:20 
Warren 04/19/2009 12:52 
Lewis L 04/19/2009 13:04 

   < Previous Message Index    

© 1996-2004 Nostalgia Air