| :Do any of you guys have better alignment instructions or are you more familiar with the trimmer cap layout on this Zenith 6s-222? : :The instruction that I found on Riders 8-24... say for SW band "C" (5-18mhz) to set the dial to 18mhz and adj cap-K for max, :Then they say to set to 16.5mhz and adj cap-L (under chassis) for max. while rocking the tuner. :Ok great.. I can see that for 18mhz... ok got it no problem... but which trimmer under the chassis is "L" ?? :I think it is the one I labeled #3... but then what are caps # 1 and #2 for? :  ::: : :Hi!Peter, If you Google ( the schematic bank) and click on the link you can get a Beitman's Schematic (FREE) and in the parts section there is a letter designation for each trimmer which is also shown on the schematic.You can identify each one on your radio by which tube it goes to. Good Luck with it! Bob Masse |
| Zenith 6s222 Alignment help | |
 Peter G. Balazsy | |
  Bob Masse | |
| Lawrence Goldy | |
| Johnny | |
| Lawrence Goldy |
| < Previous Message | Index | Next Message > |