Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 

< Previous Message

Index

Next Message >

Antique Radio Technical Forum
Philco 90 Has Same Volume At All Volume Settings

Posted by Warren on 04/12/2012 18:55

By grounding this grid, that would have killed any audio going into this tube. Somewhere you may have made an error when re-capping this set. Thus bypassing this stage. This is why the volume control has no effect. There is audio going into the 1st AF tube grid that should have come from the plate of the Det Amp tube. Check your work in this area with the clear schematic. IPAddress: ***.127.63.176

Philco 90 Has Same Volume At All Volume Settings
Johnny	04/12/2012 12:18
Warren	04/12/2012 13:19
Lou	04/12/2012 13:26
Johnny	04/12/2012 14:12
Warren	04/12/2012 15:31
Johnny	04/12/2012 16:07
Warren	04/12/2012 17:49
Johnny	04/12/2012 18:09
Warren	04/12/2012 18:55
Johnny	04/12/2012 21:36
Johnny	04/13/2012 15:32
Warren	04/13/2012 17:25
Johnny	04/13/2012 20:14
Mitch	04/14/2012 16:54
Edd	04/14/2012 17:28

< Previous Message	Index	Next Message >

© 1996-2004 Nostalgia Air