Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 

    Index Next Message >   

Antique Radio Technical Forum
A Volume Pot Question Now

Posted by Johnny on 04/16/2009 16:34

Hi! So I'm still debugging the Philco 41-285. I've got the volume pot isolated, in fact completely out of the radio. It is the original pot according to the part# on it and the parts list. Schematic says it should be 2meg total and 1meg from outer legs to the center tap. On mine it rades 2meg across the pot but it also reads 2meg from each leg to the center tap. Is this pot defective?
Thanks, Johnny

A Volume Pot Question Now 
Johnny 04/16/2009 16:34 
Rene 04/16/2009 17:53 
Doug Criner 04/16/2009 19:17 
Johnny 04/16/2009 21:29 

    Index Next Message >   

© 1996-2004 Nostalgia Air