Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 

   < Previous Message Index Next Message >   

Antique Radio Technical Forum
The Hum From The Speaker

Posted by Johnny on 04/16/2009 02:15

:With capacitor trimmers, 1 turn is a good place to start. However, messing around with the trimmers to get reception is pretty much shooting in the dark. Follow the advice I gave you and let us know how far you get. Start at the speaker and work your way back until you can't get a signal to go through (from your signal generator or finger). That is a logical straight-forward way of going about it. Once you can't get a signal, the trouble most likely lies within that stage. You CAN find the trouble. Aside from measuring capacitors and resistors, IF transformers should usually have from about 10 to 80 ohms resistance. FM IF transformers will generally be less than this, but you're not dealing with FM in this radio.
:This procedure will usually solve just about every "doesn't work" problem that arises on this forum.
:Thanks Thomas! I have the radio put back together again and have verified the audio circuit is good and oscillator is good. I've never performed checks by hooking up my freq. gen.. How do you do this? Check the various stages? Where do I induce the signal at and what should the signal be? 455Khz? Further down in my posts I explain further what has been done. What voltages are etc.

The Hum From The Speaker 
Johnny 04/11/2009 14:58 
Thomas Dermody 04/12/2009 00:16 
Ed M 04/13/2009 13:28 
Johnny 04/13/2009 19:10 
Thomas Dermody 04/13/2009 21:05 
Lewis L 04/13/2009 21:18 
Edd 04/13/2009 22:43 
Johnny 04/14/2009 07:01 
Edd 04/14/2009 11:27 
Doug H 04/15/2009 11:38 
Johnny 04/15/2009 12:01 
Doug H 04/15/2009 12:40 
Johnny 04/15/2009 17:51 
Johnny 04/15/2009 11:54 
Johnny 04/15/2009 19:58 
Johnny 04/16/2009 02:15 
The Rework Is Done 04/15/2009 23:21 

   < Previous Message Index Next Message >   

© 1996-2004 Nostalgia Air