Home  Resources  References  Tubes  Forums  Links  Support  Sale  Search 



   < Previous Message Index Next Message >   


Antique Radio Technical Forum
Zenith 5S56 Voltage on Chassis

Posted by Billy Richardson on 11/28/2005 11:09

I’m glad you have it going too Will, even though I was not of any help. Your comment about a “floating” power supply was enough get me thinking in that direction.

About the rectifier. My old tube manual copyrighted in 1940 by RCA, shows all specifications for these two tubes as being exactly the same, including the pin out. My later manual copyrighted in 1975 shows that a 5Y3GT has a maximum current rating of 125mA at 380 volts, and 150mA at 245 volts. The 5Z4 was obsolete at this time and the RCA tube manual says to use a 5Y3GT for a replacement.



Zenith 5S56 Voltage on Chassis 
Will Hodges 11/24/2005 23:22 
TonyC 11/24/2005 23:58 
TonyC 11/25/2005 07:54 
TonyC 11/25/2005 08:05 
Will Hodges 11/25/2005 22:52 
Will Hodges 11/25/2005 22:53 
will Hodges 11/25/2005 23:00 
Will Hodges 11/25/2005 23:24 
Thomas Dermody 11/26/2005 00:15 
Thomas Dermody 11/26/2005 00:20 
TonyC 11/26/2005 13:23 
TonyC 11/26/2005 14:17 
Will Hodges 11/26/2005 15:30 
Thomas Dermody 11/26/2005 22:53 
Will Hodges 11/26/2005 23:47 
Billy Richardson 11/27/2005 09:37 
TonyC 11/27/2005 10:58 
Thomas Dermody 11/27/2005 14:35 
Will Hodges 11/27/2005 17:25 
TonyC 11/27/2005 18:17 
Will Hodges 11/27/2005 22:53 
Will Hodges 11/27/2005 23:04 
Thomas Dermody 11/28/2005 00:16 
Billy Richardson 11/28/2005 11:09 
Thomas Dermody 11/28/2005 12:06 
TonyC 11/28/2005 10:19 
Rick Skowronek 11/28/2005 20:07 
Thomas Dermody 11/28/2005 21:57 
Donnie Land 11/30/2005 21:39 

   < Previous Message Index Next Message >   




© 1996-2004 Nostalgia Air