| Hi Dave, I can understand your concern to pry gently, but you may be prying too gently to avoid creating damage you can't repair. I think your radio was sbjected to heat and the rubber bushings have melted. These were typically around the screw holes. When prying, pry near the screw holes. You may want to put somehting down on the wood to protect that, too. AES carries replacements for the rubber bushings. The ones in your radio of course are shot. Best Regards, Bill Grimm |
| Stuck Zenith chassis? | |
 Dave A. | |
  Eddie | |
 Thomas Dermody | |
| Dave A. | |
| Pry It Up | |
| Bill G. | |
| Dave A. - Thanks. | |
| planigan |
| < Previous Message | Index | Next Message > |